PET system
Dehumidifier for Blow Mold
Dew Prevention of Mold Makes High Cycle Molding Possible
The self developed heat pipe increased dehumidifying capacity by 35 %.
- Application
-
- Injection Mold
- Dew Point of Blown Air
- 5 to 15 degC
Product features
Dew Prevention of Mold Makes High Cycle Molding Possible
The self developed heat pipe increased dehumidifying capacity by 35 %. Duct connection is easy because of a high static pressure of the blown air. By the corrugated aluminium fine, heat conduction has been increased.
Dehumidifier for Injection Mold
This is a mold dehumidification equipment developed to cope with the high temperature and high humidity climate (rainy season) unique in Japan. In Japan, this is supplied only by Reiken, and demands are growing steadily each year. This is also exported to many countries, for instance, Southeast Asia and some European countries in the so-called Mediterranean climate zone.
Great Dehumidifying Power
Adoption of a heat pipe increased the dehumidifying capacity by 35 % over the conventional equipment.
Duct Connection and Removal Made Easy
Wind velocity : 16 Nm3/min (Room temp 25 degC, RH 70 %)
Dehumidifying capacity : 7.37L/h = 1.8 L Bottle x 4 pcs (RD-900)
