 |
 Application
Injection Mold
Dew Point of Blown Air
5 to 15 degC
Dew Prevention of Mold Makes High Cycle Molding Possible
The self developed heat pipe increased dehumidifying capacity by 35 %.
Duct connection is easy because of a high static pressure of the blown
air. By the corrugated aluminium fine, heat conduction has been increased.
Dehumidifier for Injection Mold
This is a mold dehumidification equipment developed to cope with the high
temperature and high humidity climate (rainy season) unique in Japan. In
Japan, this is supplied only by Reiken, and demands are growing steadily
each year. This is also exported to many countries, for instance, Southeast
Asia and some European countries in the so-called Mediterranean climate
zone.
Great Dehumidifying Power
Adoption of a heat pipe increased the dehumidifying capacity by 35 % over
the conventional equipment.
Duct Connection and Removal Made Easy
Wind velocity : 16 Nm3/min (Room temp 25 degC, RH 70 %)
Dehumidifying capacity : 7.37L/h = 1.8 L Bottle x 4 pcs
(RD-900)
|
|
